tag:blogger.com,1999:blog-6723975250271836091.post7622419227458028585..comments2023-10-17T12:58:25.113+02:00Comments on Using the Canon HF100 PAL HD Camcorder: Raynox 5050PRO with adapter ring - Really?Unknownnoreply@blogger.comBlogger9125tag:blogger.com,1999:blog-6723975250271836091.post-42500042640356724222010-04-12T23:27:37.044+02:002010-04-12T23:27:37.044+02:00Bought HD5050, mounted on my HF100 with the adapto...Bought HD5050, mounted on my HF100 with the adaptor 37/37<br /><br />First days of shooting all good,<br /><br />After few months, vignetting appears!?<br /><br />Probably due to "minimal/critical disalignment" errors<br /><br />Decided to take off the ring, everything went fine.<br /><br />I had the same doubt of Gareth on the shape of the 5050lens (curve)<br /><br />But I've noticed that HF100 is convess, so they should be complanary. I've marked with a pencil the two lens, and I have not fastened as hell the 2 bodys. In the case the 2 body touch a little bit I hope they wont make attrite by moving. I'll check the marks, and if anything moves i'll put some tape.<br /><br />Does anybody get a thinner ring?<br /><br />Thanks everyone,<br />PaoloUnknownhttps://www.blogger.com/profile/14352911938109728477noreply@blogger.comtag:blogger.com,1999:blog-6723975250271836091.post-88591330299408436312009-11-20T13:29:58.407+01:002009-11-20T13:29:58.407+01:00Hi there, can you provide a sharp picture of the R...Hi there, can you provide a sharp picture of the Raynox 37mm to 37mm filter?<br /><br />I wonder if I could stack a couple of this to make a tube... :DAnonymousnoreply@blogger.comtag:blogger.com,1999:blog-6723975250271836091.post-8943289308291355112008-12-22T06:46:00.000+01:002008-12-22T06:46:00.000+01:00Has anyone compared the Raynox 5050PRO with the OE...Has anyone compared the Raynox 5050PRO with the OEM Canon WD-H37 II? Does anyone have any URLs of sharpness tests?<BR/><BR/>The Canon lens is pricey at $190.00 US, but I've been through too many fuzzy wide angles, and the vignetting seems like another possible issue. thanks.Unknownhttps://www.blogger.com/profile/00193994792588701404noreply@blogger.comtag:blogger.com,1999:blog-6723975250271836091.post-7469188750351543372008-12-15T20:42:00.000+01:002008-12-15T20:42:00.000+01:00i use the 37/37mm adapter between my hf100 cam and...i use the 37/37mm adapter between my hf100 cam and the 5050pro winde angle. so no shadows. <BR/><BR/>when i mount the wideangle directly without adapter, its not possible to completly screw in the objectives thread, a little space remains.<BR/>due to the fact that both threads are made of plastic, its no secure solution. <BR/><BR/>the adapter works as a "thread secure" to.<BR/>in case that some mad day my cam drops to the ground (..that will never happen uh) hopefully only the thread of the adapter would be broke and not the "expensive" cams-objective thread.. sflexohttps://www.blogger.com/profile/12475052752377447597noreply@blogger.comtag:blogger.com,1999:blog-6723975250271836091.post-6409248300594402772008-08-02T20:00:00.000+02:002008-08-02T20:00:00.000+02:00I've found out that the shadow is only visible whe...I've found out that the shadow is only visible when watching the clips on a PC. When I watch it on my LCD 1080P TV there ain't no shadows noticable. I can live with that.<BR/><BR/>Regards<BR/><BR/>GeraldUnknownhttps://www.blogger.com/profile/01450712167655322930noreply@blogger.comtag:blogger.com,1999:blog-6723975250271836091.post-2457579701121846162008-07-29T08:26:00.000+02:002008-07-29T08:26:00.000+02:00They say in the HV10 / Raynox HD-5050PRO discussio...They say in the HV10 / Raynox HD-5050PRO discussion<BR/><BR/>http://dvinfo.net/conf/showthread.php?t=94258<BR/><BR/>that "As the first lens on the camcorder side is a little bit higher than the filter thread, it can't be mounted directly to the HV-10." <BR/><BR/>"A 37mm / 37mm adapter has to be used to bring the lens a few millimeters away from the camcorder."<BR/><BR/>and that without adapter there is a "space between the HV-10 casing and the Raynox"<BR/><BR/>Is there any space between the HF100 casing and the Raynox? <BR/><BR/>The first photo suggests that there is some space, but it is hard to tell.Unknownhttps://www.blogger.com/profile/16932706062738835175noreply@blogger.comtag:blogger.com,1999:blog-6723975250271836091.post-72158605080955111892008-06-23T13:06:00.000+02:002008-06-23T13:06:00.000+02:00I don't know the reason for the 37/37mm adapter. T...I don't know the reason for the 37/37mm adapter. The instructions say you should use the ring but they are general and not for a specific camcorder. My observation is that anything (e.g. a filter) between the HF100 and the wide angle converter will drop a shadow.Martin Kochhttps://www.blogger.com/profile/16761825250116300102noreply@blogger.comtag:blogger.com,1999:blog-6723975250271836091.post-70561933890368370602008-06-23T10:59:00.000+02:002008-06-23T10:59:00.000+02:00Could it be possible that you just need the adapat...Could it be possible that you just need the adapator when you using a Filter with the Convertor?Unknownhttps://www.blogger.com/profile/01450712167655322930noreply@blogger.comtag:blogger.com,1999:blog-6723975250271836091.post-90493785031368183542008-06-23T10:56:00.000+02:002008-06-23T10:56:00.000+02:00Why using an Adapter Ring when the convertor fits ...Why using an Adapter Ring when the convertor fits the cam without it?<BR/>I also have a Canon HF100 but I've got the US model and I have ordered the Raynox 5050 Pro too. I will get it soon. Then I will post my experience here. Greetings from Vienna.Unknownhttps://www.blogger.com/profile/01450712167655322930noreply@blogger.com